EZNEC v. 6.0,
EZNEC+ v. 6.0
New Since EZNEC 3.0 - 5.0
New Features since v. 5.0
gives you all that, plus:
Graphical wire modifications
– Add, move, delete wires directly in the View Antenna display.
Correction for trapped, loaded Yagis
– Improved stepped wire diameter correction.
– 2x - 3x speed improvement typical on multiple CPU machines.
Insertion object placement check
– Reports source, load, transmission line, etc. placement errors.
– Splits single wire into multiple wires for intermediate connections.
Enhanced wire scaling
– Limit axes and choose center for wire scaling.
2000 segment maximum
– Increased from 1500 in earlier versions.
Catenary wire creation
– Realistic modeling of sagging wires.
Touchstone s1p format file output
– For import into RF analysis programs.
Additional New Features since v. 4.0
For the first time, EZNEC
is able to model an entire antenna system,
from the antenna back to the transmitter. With new L networks, transformers, and transmission line
loss, you can include tuners, phasing networks, impedance matching
networks, and realistic transmission lines in your model. New features
gives you all that, plus:
New modeling objects
– L networks, transformers, parallel connected loads.
segments" – Makes it easy to interconnect
no longer necessary to create small wires.
Transmission line loss
– Changes realistically with frequency.
Easily scale any number of wires, optionally including diameter and
New 2D plot grid style
– Larger plots when a ground is present, and easier to
chart display – Shows SWR sweep output on a
impedance displays – Shows SWR sweep output
loss or reflection coefficient magnitude.
IONCAP/VOACAP files – Writes type 13 input
these popular propagation programs.
wire features – To make translated and/or
or reflections of a group of wires, or make a cylindrical structure.
frequency sweep steps – For detailed analysis
over a wide
Features since v. 3.0
you all that, plus:
Unlimited undo/redo –
Undo all changes you made since opening the
Insulated wire – No more
guessing about its effect on wire length.
Geometry check –
Prevent illegal wire connections, crossings,
Faster calculations – EZNEC v. 4.0
is 20% - 400% faster than v. 3.0.
Easily create and resize loops –
working with quads a snap.
Helix creation – For
modeling loading coils, too.
Stack, copy,move, rotate groups of wires
make complex antennas.
Enhanced 2D plot features – Move 2D
cursor from trace to trace, directly read the
Full View Antenna mouse operation
move, zoom wtih the mouse.
Improved printing – Access
advanced printer features. Selected printer no longer becomes system
1500 segment capability
Double precision NEC-2 calculating engine
Easy import of NEC-format wire coordinates
you order a download, please make a backup copy of
the downloaded file on some other
medium besides your primary hard drive. If you don't
have any way
to back up the
downloaded file (< 20 MB), please order the CD
with or without
the download to protect
against loss of EZNEC
in the event of a hard drive
EZNEC v. 6.0 Frequently
Asked Questions (FAQ)
Your prices to upgrade to EZNEC
are shown on the upgrade
notice you have received by email or mail.
Please email me if you haven't received your v. 6.0 upgrade notice. When you place your order, enter your customer ID (from the upgrade
notice), and make your EZNEC/EZNEC+
selection, the EZNEC
system will know to charge you the correct price.
to the home